Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Andover?
Garage door repair in Andover typically costs $150 – $600, depending on what has failed. A single broken spring runs $180 – $340, an opener repair $120 – $320, and a full new door installation $700 – $2200. Those are estimated ranges for the Andover market in 2026; your written estimate sets the final price, and estimates are free.
We work on the door you already have. That means a technician diagnoses the actual failure before anyone talks about replacement, whether the door is a Clopay steel panel, an Amarr carriage house style, or an older Wayne Dalton that has been on the same track since the house was built. One call covers springs, cables, openers, panels, and full installations, so you don’t end up coordinating between two contractors.
If the door won’t open and you can’t wait, call (877) 492-1952. Emergency garage door service is a core part of what we do, not something bolted on the side, and same-day service is often possible.
Key Takeaways
- Most garage door repairs in Andover land between $150 and $600.
- Spring repair is $180 – $340 for one spring; a matched pair is usually replaced together and costs about twice that.
- Opener repair is $120 – $320; a new opener installed is $250 – $550.
- A complete new door installation is $700 – $2200.
- Estimates are free and the written quote is the price.
Garage Door Cost Breakdown (2026)
Here are the typical estimated ranges we quote in Andover. Every job is different, so treat these as a starting point, not a final number.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a bill toward the top of a range: a torsion spring setup that needs a matched pair rather than a single spring, a door out of square after a vehicle strike, an opener with a failed logic board on a LiftMaster or Chamberlain unit, or a panel that has to be matched to a discontinued Clopay or Raynor profile. What keeps it near the bottom: straightforward roller and track work, a Genie or Craftsman opener that only needs a gear or sensor fix, and a single cable that snapped cleanly.
For a specific repair quote, see our guide to garage door repair in Andover, which walks through how we diagnose each failure type before pricing it.
What Affects Garage Door Pricing in Andover
- Door type and brand. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Each line has its own tolerances and failure patterns, and parts availability varies. A common brand with a common failure is quick work. An older or less common profile can take longer to source and fit.
- Spring configuration. Single-spring doors and matched-pair torsion systems price differently. If one spring in a pair has failed, the other has usually lived the same life and is close behind, so we explain both options and let you decide.
- Whether the door is in balance. A door that binds, jerks, or drifts down on its own usually needs track or roller work in addition to whatever the original call was about. That’s not an upsell; it’s what shows up in the diagnosis.
- Opener age and model. Openers from a few brands are simple to repair with common parts. Older units sometimes cost more to fix than to replace, and we’ll say so plainly rather than sink money into a dead motor.
- Panel matching. A dented panel on a current production door is a straightforward swap. On a discontinued line, matching color and profile can be the deciding factor between a panel replacement and a larger job.
- Access and door size. A standard single-car door in a typical Andover garage is faster to work on than a wide double door with tight clearance above the track. That affects labor time, and labor time is part of every estimate.
New England weather plays a role too. Cold winters and freeze-thaw cycles are hard on springs and on the seals and weatherstripping around the opening, and a door that struggled through a cold snap often needs more than one adjustment. We see a steady run of spring and cable calls once the temperature drops. That’s not a sales pitch, just how the season shows up in this part of Massachusetts.
Repair or Replace? How to Decide
Repair is usually cheaper in the short term, and for a door that’s structurally sound, it’s the right call. A $200 spring repair on a door that’s otherwise in good shape beats a $1,200 installation every time. The math flips when the door itself is the problem: cracked panels, a bent track that won’t stay true, a rusted bottom section, or a door that’s been struck and is out of square. In those cases, patching one part often means another fails next month.
Our approach is the right fix, not the easiest upsell. We diagnose the door you have, tell you what’s actually wrong, and lay out both paths when replacement is genuinely on the table. You decide. There’s no pressure to move to a new door if a repair will do.
When a door does need replacing, a new door installation runs $700 – $2200 depending on size, material, and whether the opener is reused or replaced. That’s a full-system job, and it’s one we handle from start to finish, so you’re not juggling a door installer and an opener tech separately.
How to Save on Garage Door Repair in Andover
- Get the diagnosis before the quote. A technician who can name the failed part gives you a price you can trust. A vague “it’ll be a few hundred” is a red flag.
- Catch springs early. A door that’s getting heavy or sluggish is telling you something. Fixing one spring before the second one goes avoids a full pair replacement later. That’s a real savings, not a marketing line.
- Don’t ignore the small stuff. Rollers and tracks are cheap to service at $110 – $220. Left alone, they wear the door and opener harder, and the bill climbs.
- Repair the opener before replacing the door. A dead opener doesn’t mean a dead door. Opener repair at $120 – $320 is often all that’s needed on a Genie, LiftMaster, or Chamberlain unit that’s otherwise fine.
- Ask when it’s a pair and when it’s a single. We’ll tell you honestly if one spring needs replacing or if both do. A matched pair is usually replaced together, and a pair costs about twice the single-spring range, so it helps to know which situation you’re in up front.
- Get a free estimate. Call (877) 492-1952 and we’ll talk through what’s happening before anyone comes out. No charge, no obligation, and you get a straight answer.
For spring work specifically, our garage door spring repair in Andover page covers what a technician actually checks and why this is one repair you don’t want to take on yourself.
Spring Repair: Why It Costs What It Costs
Springs are the highest-stress component on any garage door, and they’re the repair most often botched by someone who shouldn’t be touching them. A torsion spring is under serious tension, and if it lets go while someone is working on it, the injury can be severe. That’s why we treat spring repair as a dedicated service with technicians trained specifically for it.
A single spring repair is $180 – $340 in Andover. A matched pair is usually replaced together because two springs on the same door have usually seen the same cycles, and a pair costs about twice the single-spring range. When we look at your door, we’ll tell you which one you’re looking at and why.
If your door is heavy, won’t stay up on its own, or you’ve heard a loud bang from the garage, treat that as a sign to stop using the door and call. That’s a trained-professional job, and we’d rather you call than get hurt. Reach us at (877) 492-1952.
Why the Brand Matters on Price
We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That range exists for a reason: the brand on your door or opener tells a trained technician a lot. It tells us which springs are typical for that door, which opener parts are common wear items, and which profiles are hard to match if a panel needs replacing.
Brand-agnostic service also means we’re not steering you toward one manufacturer’s parts because they carry a better margin. The recommendation comes from what your door needs. If a Craftsman opener needs a logic board and the part is available, we’ll say so. If a Raynor door needs a panel that’s out of production, we’ll tell you that too and lay out the alternatives.
Opener work is a big part of this. Our garage door opener repair page explains the common failure points across the major brands, and our garage door opener installation page covers what a full replacement involves when repair no longer makes sense. It’s all one call, so you’re not tracking down two different companies for a door problem that’s really one system.
Emergency Garage Door Service in Andover
A door that won’t close is a security problem, and a door that won’t open traps your car. We get that, so emergency garage door service is built into how we operate, not a premium line item you have to hunt for. Call (877) 492-1952 and we’ll work to get someone out quickly. Same-day service is often possible.
A few things that count as an emergency rather than a wait-until-later problem: a door stuck half-open, a cable that’s snapped and wrapped, an opener that’s running but the door isn’t moving, or a door hanging off its track. If any of those describe your situation, call rather than force the door. Forcing a broken door usually makes the repair bigger.
What a Typical Garage Door Quote Covers
A fair estimate in Andover should spell out the parts and the labor separately. That way you can see what you’re paying for instead of guessing. Here’s what we expect a written estimate to include:
- The specific failed part or parts, named, not just “door repair.”
- Whether the quote is for one spring or a matched pair.
- Labor time and how it was estimated.
- Any parts sourcing lead time if a panel or opener board is not in common supply.
- The final price, in writing, with no surprises on the invoice.
Prices are estimates and the written quote is the price. That’s a simple principle, but not every quote works that way. We stand behind the number we give you.
FAQs – Garage Door Cost in Andover
How much does garage door repair cost in Andover?
Typical garage door repair in Andover runs $150 – $600. The exact number depends on what failed: a single spring is $180 – $340, a cable is $130 – $250, an opener repair is $120 – $320, and track or roller work is $110 – $240. Call (877) 492-1952 for a free estimate on your specific door.
How much does garage door spring repair cost in Andover?
Spring repair is $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. The written estimate sets the final price, and estimates are free. Call (877) 492-1952 to book one.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door itself is sound. A $200 – $340 spring repair beats a $700 – $2200 installation. Replacement makes sense when the door is cracked, out of square, or structurally failing. We’ll lay out both options and you decide, with no pressure either way. Call (877) 492-1952 to talk it through.
Can you come today if my garage door won’t open?
Same-day service is often possible, and emergency garage door service is a core part of what we do. A door that won’t open, a snapped cable, or a door off its track all warrant a call. Dial (877) 492-1952 and we’ll get you scheduled.
How much does a new garage door cost in Andover?
A new door installation is typically $700 – $2200, depending on size, material, and whether the opener is reused or replaced. Opener installation by itself is $250 – $550. The written estimate sets the final price; call (877) 492-1952 for a free one.
Do you work on my brand of door or opener?
We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. If your door or opener is one of those, we’ve seen the failure patterns and parts before. For anything else, call (877) 492-1952 and we’ll tell you straight whether we can help. For more about our full range of work, visit Lawrence Garage Door Repair Co.
Pricing reflects the Andover market as of 2026. Lawrence Garage Door Repair Co offers free estimates – call (877) 492-1952.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Jeff Rhodes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Dana Barrett"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Leela Mehta