Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Services in Andover, MA
Most of Andover’s garage doors are the wrong thing to be missing. On an attached two- or three-car garage, that door is the largest wall facing the street, and when a spring strips on a below-freezing morning off River Road, the whole front of the house looks broken. We’re Lawrence Garage Door Repair Co, and we work on the door you already have, whatever brand it is. Our technicians have up to 15 years of experience, we answer calls fast, and estimates are free. Call (877) 492-1952 and we’ll get you a straight answer on what’s actually wrong.
Why Andover Homeowners Choose Lawrence Garage Door Repair Co
Andover isn’t one kind of town to work in. One job is a thermally-frozen 1950s wood door in the historic districts north of the Shawsheen; the next is high-lift insulated steel on a 2000s subdivision build off River Road. A generalist guesses at the difference. We diagnose it. Our technicians are trained across eight major brands (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor), so we know the tolerances, the failure patterns, and which parts fit what you already own instead of pushing a replacement you don’t need.
That matters most on spring repair, one of the most dangerous and most botched jobs in this trade, and on emergency calls where waiting until Monday isn’t an option for a house in Ballardvale or along Lowell Junction. We put technicians near both, aim for same-day service on repairs, and we quote the price before we start. You can read more about Lawrence Garage Door Repair Co if you want the full picture on how we work.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Services We Offer in Andover
Garage Door Repair
Panels, rollers, tracks, cables, hinges, weather seals: if the door is binding, crooked, noisy, or off its track, we find the actual cause instead of replacing parts until it works. Older wood and early single-layer steel doors in odd non-standard widths are routine here, so we measure rather than assume. Learn more about our garage door repair in Andover.

Garage Door Opener Repair
A dead opener is often a worn gear, a misaligned safety sensor, or a limit setting that drifted, not a unit that needs replacing. We repair LiftMaster, Chamberlain, Genie, and Craftsman openers and only recommend a new one when the old one can’t be saved safely. Learn more about our garage door opener repair in Andover.

Garage Door Spring Repair
Torsion and extension springs carry the full weight of the door, and a snapped spring can drop it without warning. Our technicians handle this safely, match the spring to the door’s weight and cycle count, and never stretch a mismatched part to make it fit. Learn more about our garage door spring repair in Andover.

Garage Door Installation
When a door is genuinely at the end of its life, we install Clopay, Amarr, Wayne Dalton, and other leading lines and take care to match trim and siding on an architecturally visible facade. This work is measured, ordered, and scheduled, and you get a written price before anything is ordered. Call for a free measure.
Emergency Garage Door Service
When a door won’t open, won’t close, or hangs half-traveled, emergency service is a core part of what we do, not an afterthought. Call (877) 492-1952 and we’ll get a trained technician headed your way.
Neighborhoods We Serve in Andover
We cover the whole town, from the historic districts north of the Shawsheen to the newer streets off River Road and down around Lowell Junction. Typical response across Andover is same-day for repairs when you call early. A sample of where we work most:
- Ballardvale
- Shawsheen Village
- Andover town center, around 01810
- The Lowell Junction area
- River Road subdivisions
See the difference
Before
After
Before
After
Before
AfterWhy Andover’s Climate & Housing Affect Garage Door
Andover’s inland Merrimack Valley winters are the real stress test. Below-freezing stretches, road-salt spray, and ice storms hammer torsion springs, rollers, and bottom weather seals, and the door-to-floor seal has to handle heavy snow load and repeated freeze-thaw cycles. The busiest call mornings come after a Nor’easter ice storm, when frozen bottom seals and stripped springs show up on the town-center colonials where the driveway grade drains back toward the garage. Summer humidity does its own damage, warping and swelling older wood panels until they bind in the track. And because almost every garage here is attached rather than a detached shed, a door failure is a curb-appeal problem, not a backyard one: replacing a door often means matching trim and siding on the street-facing facade, not just bolting on any panel that fits the opening.
Pricing for Garage Door in Andover
Here’s a rough sense of what jobs run in Andover. These are typical estimates; the written quote is the price, and we confirm it before any work starts.
| Job | Typical estimated range |
|---|---|
| Spring repair, one spring | $180 – $340 |
| Matched spring pair (usually replaced together) | About twice the single-spring price |
| Opener repair | $120 – $280 |
| Off-track or cable repair | $150 – $350 |
| New door installation | Measured and quoted per door |
Installation is priced after a free measure because panel style, insulation, and window options change the number. On repairs, call early and we aim for same-day service.
Service Area – Cities Near Andover
Andover sits right in the middle of our Merrimack Valley coverage, so we also take calls in Lawrence, North Andover, Tewksbury, and Methuen Town. If you’re just over the line, call and we’ll confirm coverage and timing.
Serving Andover, MA – Our Local Coverage Area
We serve Andover and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door in Andover
One spring typically runs $180 – $340 in Andover, and because matched springs are usually replaced as a pair, a pair costs about twice that. The written estimate sets the final price before we begin. Call (877) 492-1952 for an exact quote; estimates are free.
Yes, in most cases. Emergency service is a core offering and repair calls in Andover often get same-day service when you call early. Call (877) 492-1952 and we’ll get a technician to you.
No, not without your go-ahead. We diagnose first, quote the price, and agree it with you before any work starts, so there’s no surprise invoice at the end. Call (877) 492-1952 for a free estimate.
The local pro we connect you with is licensed and insured as Massachusetts requires, and our technicians have up to 15 years of experience. Call (877) 492-1952 to book.
Yes. Older wood and early steel doors in odd non-standard widths are routine here, and we re-engineer tracks and springs to fit rather than forcing a standard part. Call (877) 492-1952 for a free estimate.
Whether it’s a stripped spring in Ballardvale or a dead opener near Lowell Junction, one call covers repair, springs, openers, and full installation, with no handoff to a second contractor. Call (877) 492-1952 for a free estimate and we’ll tell you exactly what’s wrong and what it costs before we start.
Written by the team at Lawrence Garage Door Repair Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Andover Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Jeff Rhodes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Dana Barrett"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Leela Mehta