Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lawrence?
Panel replacement in Lawrence typically costs $250-$500 for the damaged sections, and most jobs land near the middle of that range. A single dented lower panel is usually the cheapest fix; a full section swap on a wide two-car door runs toward the top. That estimate covers the panel, the labor to set it, and the readjustment of the tracks and hinges so the door still travels evenly. The written estimate sets the final price.
Here’s the part most homeowners don’t hear until they call: you almost never need a whole new door. If the springs, opener, and frame are sound and only the skin is dented, cracked, or rusting, replacing the affected panels restores how the door looks and runs for a fraction of a full replacement. One call to Lawrence Garage Door Repair Co covers the diagnosis, and our technicians have up to 15 years of experience reading what a door actually needs.
Key Takeaways
- Panel replacement in Lawrence runs about $250-$500 for typical residential doors, panels only.
- One damaged panel is usually the cheapest repair; multiple panels and wide doors cost more.
- Panel-only work is far cheaper than a new door, which runs $700-$2200.
- Free estimates: call (877) 492-1952 to confirm your exact number.
Panel Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Lawrence market. The panel itself is only part of it; getting the new section to sit flush against the rest of the door takes time, and that labor is built into the ranges below.
| Job | Typical Estimated Range |
|---|---|
| Single panel replacement (one section) | $250-$500 |
| Panel replacement, lead range for most Lawrence homes | $250-$500 |
| Full garage door repair (panels plus hardware) | $150-$600 |
| New door installation (if replacement makes more sense) | $700-$2200 |
| Spring repair, per spring (often paired with panel work) | $180-$340 |
| Cable repair | $130-$250 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| Opener repair | $120-$320 |
What pushes a panel job up? Number of panels, panel width, and whether the new section matches a discontinued profile. If a panel is bent, odds are good the tracks took a hit too, and straightening them adds to the bill. A single section on a standard door stays near $250-$500. A wide door with two or three damaged sections plus track work lands closer to the top and can reach into the general garage door repair range of $150-$600. The written estimate sets the final price.
What Affects Panel Replacement Pricing in Lawrence
- Which panel and how many. The bottom section takes the most impact and is the most common single-panel job. Each additional panel adds cost, so a door with damage spread across two or three sections climbs quickly.
- Panel match and availability. Matching a specific profile and color to the panels that are still on your door matters. Clopay, Amarr, Wayne Dalton, and Raynor each make distinct profiles, and a discontinued style can push the cost up or rule out a clean match.
- Track and hardware condition. A dented panel often comes with a bent track or a hinge that took the hit. If the door won’t travel straight after the panel goes on, the hardware needs attention, which adds to the estimate.
- Draft and climate. Lawrence winters are cold and wet. A cracked or rusting panel lets cold air and moisture into the garage, so fixing it before the freeze keeps the space usable and stops the damage from spreading along the seam.
- Door height and width. A single-car door is simpler to work on than a wide two-car door. Larger panels cost more and take longer to fit and align.
- Whether a repair is actually needed. Sometimes a bent panel can be straightened during a routine fix, and sometimes a worn one is best replaced. We diagnose the door you have and recommend the cheaper honest fix rather than the easiest upsell. If springs are the real problem, that’s a separate spring repair call.
How to Save on Panel Replacement
The biggest saving is catching the damage early, before a bent section starts grinding against a track and takes out hardware with it. A single panel replaced promptly stays near the low end of the $250-$500 range; let it go and the same door can need panels plus track and roller work.
- Replace only the damaged panels. Don’t let anyone talk you into a full door when one section is bent and the rest is sound. We work on the panel that failed and leave the rest alone.
- Fix it before winter. A cracked or rusting panel at the bottom of the door gets worse with repeated freezing and thawing. Handling it in the fall saves the surrounding sections from pulling apart.
- Ask for a panel match, not a full skin. Keeping the panel colors and profiles aligned to what’s already on the door keeps the job small and the price down.
- Bundle related hardware work. If the rollers or a hinge took the same hit, a single visit that covers both is cheaper than two separate call-outs.
- Get a free estimate first. You don’t need to guess. Call (877) 492-1952 and we’ll look at the door, tell you what a typical panel job actually needs, and give you a written number. Estimates are free.
If you’re not sure whether a damaged panel, a sagging section, or a failing opener is behind the problem, a quick look from a technician settles it. Our team handles openers, springs, panels, and full door systems in one place, so there’s no handoff and no second contractor to chase. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor are all covered.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Lawrence?
Typical panel replacement in Lawrence runs $250-$500 for the damaged sections, labor included. A single damaged panel lands near the low end; multiple panels on a wide door push toward the top. Call (877) 492-1952 for a free estimate on your specific door.
Is it cheaper to replace a panel or a whole door?
A panel replacement at $250-$500 is far cheaper than a new door at $700-$2200. Replacing the panels is the right call when the frame, springs, and opener are sound and only the skin is damaged. If the structure is failing, a new door can make more sense, and we’ll tell you straight which case you’re in.
Can you fix a single damaged panel, or does the whole door need to go?
Yes, a single panel can usually be replaced on its own. We match the profile and color to the panels still on your door so the repair blends in, and we check the tracks and hinges on the way. One section is a small job, and it stays well under the $250-$500 ceiling.
What if the panel is dented but the door still opens fine?
A door can run fine with a dented panel for a while, and fixing it early keeps the cost at the low end of $250-$500. A bent section can start rubbing a track and damage the hardware, which turns a panel job into a bigger repair. Addressing it before it spreads is cheaper.
Why does a new door cost more than a panel job, and when is it worth it?
A new door runs $700-$2200 because it replaces the whole system; panels alone stay at $250-$500. A full door makes sense when multiple sections are failing at once or the panel style is no longer made, leaving no clean match. If the rest of the door is solid, panel replacement is the right fix, not the easiest upsell.
When a panel is bent, cracked, or rusting, the answer is often smaller and cheaper than a new door. We work on the door you have, diagnose what actually failed, and give you a written estimate before any work starts. Call (877) 492-1952 for a free estimate on panel replacement in Lawrence. Our technicians have up to 15 years of experience, and one call covers panels, springs, openers, and full installations.
Pricing reflects the Lawrence market as of 2026. Lawrence Garage Door Repair Co offers free estimates – call (877) 492-1952.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Jeff Rhodes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Dana Barrett"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Leela Mehta